Le Forum des Freebox Ultra, Delta, Pop, Révolution & Mini 4K

Code : Tout sélectionner

esphome:
  name: esphome-web-e36494
  friendly_name: ESPHome Web e36494

esp32:
  board: esp32dev
  framework:
    type: arduino

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "souR3/tpme3dh3z4Dg5hsQy476J1kxf+U0jCPpXLg6Y="

ota:


wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esphome-Web-E36494"
    password: "mg4kfyu9qmtC"

captive_portal:

web_server :
  port: 80

  # Example configuration entry
dallas:
  - pin: GPIO14

# Individual sensors
sensor:
  - platform: dallas
    address: 0x1C0000031EDD2A28
    name: "Temperature Piscine"
    

Code : Tout sélectionner

INFO ESPHome 2023.11.6
INFO Reading configuration /config/esphome/esphome-web-e36494.yaml...
INFO Generating C++ source...
INFO Compiling app...
Processing esphome-web-e36494 (board: esp32dev; framework: arduino; platform: platformio/espressif32@5.4.0)
--------------------------------------------------------------------------------
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
 - toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
Dependency Graph
|-- AsyncTCP-esphome @ 2.0.1
|-- WiFi @ 2.0.0
|-- FS @ 2.0.0
|-- Update @ 2.0.0
|-- ESPAsyncWebServer-esphome @ 3.1.0
|-- DNSServer @ 2.0.0
|-- ESPmDNS @ 2.0.0
|-- noise-c @ 0.1.4
|-- ArduinoJson @ 6.18.5
Compiling .pioenvs/esphome-web-e36494/src/esphome/components/api/api_connection.cpp.o
sh: 1: xtensa-esp32-elf-g++: Permission denied
*** [.pioenvs/esphome-web-e36494/src/esphome/components/api/api_connection.cpp.o] Error 127
Compiling .pioenvs/esphome-web-e36494/src/esphome/components/api/api_frame_helper.cpp.o
sh: 1: xtensa-esp32-elf-g++: Permission denied
*** [.pioenvs/esphome-web-e36494/src/esphome/components/api/api_frame_helper.cpp.o] Error 127
========================== [FAILED] Took 4.56 seconds ==========================